VC Global Synergy

We are a supplier and service provider for all types of industrial manufacturing and maintenance work.

03 5887 2226
Email: admin@vcglobalsynergysb.com.my

VC Global Synergy
No 73 Jalan BRP 2/2C PUTRA HILLS BKT RAHMAN PUTRA 40160 Sg.Buloh Selangor

No.17, Lot 3 Paramount Industrial Development, Jalan Tuaran, Kolombong, 88450 Kota Kinabalu, Sabah

Open in Google Maps

Home
Shop
Industrial Tools
Page 6

Industrial Tools

Showing 81–96 of 931 results

ANVIL PRUNING SHEARS 8″

CROMWELL

Mfr Part #: RTL5222050K

Unit of Measure: PCS

Spring loaded, with contoured grips and blade locking mechanism. , Overall length: 200mm. , Anvil Action, The anvil secateur is designed for cutting old, hard and deadwood. The anvil supports a wide area of the branch while the sharp narrow upper blade is forced through the wood with only a minimum amount of slicing action., Bypass Action

Add to Enquiry Basket MORE INFO
ASSORTED CUT 2 NEEDLE FILE SET 16CM 6.1/2″ 6PC

CROMWELL

Mfr Part #: KEN0316980K

Unit of Measure: SETS

6 Piece Set (1 of each): Flat, Hand, Half Round, Round, Square, Three Square

Add to Enquiry Basket MORE INFO
ASSORTED MOUNTED POINT SET OF 8

CROMWELL

Mfr Part #: KEN2502980K

Unit of Measure: PCS

Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

Add to Enquiry Basket MORE INFO
AUTOLOAD & LOCK KNIFE – 13-SEG SNAP-OFF BLADE

CROMWELL

Mfr Part #: KEN5370720K

Unit of Measure: PCS

Handle made of ABS plastic with rubber coating for extra grip. Steel blade slides prevent blade slippage or case splitting and give the knife a smooth action. Unique spring loaded automatic blade replacement and auto lock.

Add to Enquiry Basket MORE INFO
AUTOLOCK KNIFE 8-SEG SNAP-OFF BLADE

CROMWELL

Mfr Part #: KEN5370350K

Unit of Measure: PCS

Featuring a high strength ABS plastic construction, this knife has a retractable snap-off blade, integral blade snapper and auto lock, Standard: 160mm. 18 x 100mm, 8 segment blade.

Add to Enquiry Basket MORE INFO
AXLE STANDS PR 12-TONNE

Mfr Part #: KEN5035560K

Unit of Measure: PCS

Suitable for supporting raised vehicles or equipment. Protective red enamel coating. 10-position ratchet design that automatically locks when raised.

Add to Enquiry Basket MORE INFO
AXLE STANDS PR 4-TON

Mfr Part #: KEN5035520K

Unit of Measure: PCS

Suitable for supporting raised vehicles or equipment. Protective red enamel coating. 10-position ratchet design that automatically locks when raised.

Add to Enquiry Basket MORE INFO
AXLE STANDS PR 6-TON

Mfr Part #: KEN5035530K

Unit of Measure: PCS

Suitable for supporting raised vehicles or equipment. Protective red enamel coating. 10-position ratchet design that automatically locks when raised.

Add to Enquiry Basket MORE INFO
B132 MOUNTED POINT

CROMWELL

Mfr Part #: KEN2501320K

Unit of Measure: PCS

‘B’ Shape – Shank Diameter 3mm Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

Add to Enquiry Basket MORE INFO
B42 MOUNTED POINT

CROMWELL

Mfr Part #: KEN2500420K

Unit of Measure: PCS

‘B’ Shape – Shank Diameter 3mm. Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER FIBREGLASS SHAFT 1LB

CROMWELL

Mfr Part #: KEN5253450K

Unit of Measure: PCS

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury).

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER FIBREGLASS SHAFT 1LB

CROMWELL

Mfr Part #: KEN5253450K

Unit of Measure: PCS

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury).

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER FIBREGLASS SHAFT 2LB

CROMWELL

Mfr Part #: KEN5253500K

Unit of Measure: PCS

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury).

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER FIBREGLASS SHAFT 3/4LB

CROMWELL

Mfr Part #: KEN5253430K

Unit of Measure: PCS

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury).

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER HICKORY SHAFT 1/2LB

CROMWELL

Mfr Part #: KEN5252050K

Unit of Measure: PCS

Hickory Shaft, – With fine grain,forged steel head,hardened and tempered with polished faces.

Add to Enquiry Basket MORE INFO
BALL PEIN HAMMER HICKORY SHAFT 1/4LB

CROMWELL

Mfr Part #: KEN5252020K

Unit of Measure: PCS

Hickory Shaft, – With fine grain,forged steel head,hardened and tempered with polished faces.

Add to Enquiry Basket MORE INFO

ABOUT US

We are a supplier and service provider for all types of industrial manufacturing and maintenance work.

No 73 Jalan BRP 2/2C PUTRA HILLS BKT RAHMAN PUTRA 40160 Sg.Buloh Selangor

No.17, Lot 3 Paramount Industrial Development, Jalan Tuaran, Kolombong, 88450 Kota Kinabalu, Sabah

Tel :

+60 17-966 4096

Emails :

admin@vcglobalsynergysb.com.my
sales@vcglobalsynergysb.com.my
technical@vcglobalsynergysb.com.my
vcglobalsynergysb@gmail.com

PRODUCTS

MISSION

To be a prominent support and service entity in our core.

Lean Management

VISION

To fulfill our stakeholder’s expectation by:

• Continuously building expertise
• Providing services beyond expectation
• Enhancing our presence and track records

ANVIL PRUNING SHEARS 8″

Mfr Part #: RTL5222050K

Unit of Measure: PCS

ASSORTED CUT 2 NEEDLE FILE SET 16CM 6.1/2″ 6PC

Mfr Part #: KEN0316980K

Unit of Measure: SETS

ASSORTED MOUNTED POINT SET OF 8

Mfr Part #: KEN2502980K

Unit of Measure: PCS

AUTOLOAD & LOCK KNIFE – 13-SEG SNAP-OFF BLADE

Mfr Part #: KEN5370720K

Unit of Measure: PCS

AUTOLOCK KNIFE 8-SEG SNAP-OFF BLADE

Mfr Part #: KEN5370350K

Unit of Measure: PCS

AXLE STANDS PR 12-TONNE

Mfr Part #: KEN5035560K

Unit of Measure: PCS

AXLE STANDS PR 4-TON

Mfr Part #: KEN5035520K

Unit of Measure: PCS

AXLE STANDS PR 6-TON

Mfr Part #: KEN5035530K

Unit of Measure: PCS

B132 MOUNTED POINT

Mfr Part #: KEN2501320K

Unit of Measure: PCS

B42 MOUNTED POINT

Mfr Part #: KEN2500420K

Unit of Measure: PCS

BALL PEIN HAMMER FIBREGLASS SHAFT 1LB

Mfr Part #: KEN5253450K

Unit of Measure: PCS

BALL PEIN HAMMER FIBREGLASS SHAFT 1LB

Mfr Part #: KEN5253450K

Unit of Measure: PCS

BALL PEIN HAMMER FIBREGLASS SHAFT 2LB

Mfr Part #: KEN5253500K

Unit of Measure: PCS

BALL PEIN HAMMER FIBREGLASS SHAFT 3/4LB

Mfr Part #: KEN5253430K

Unit of Measure: PCS

BALL PEIN HAMMER HICKORY SHAFT 1/2LB

Mfr Part #: KEN5252050K

Unit of Measure: PCS

BALL PEIN HAMMER HICKORY SHAFT 1/4LB

Mfr Part #: KEN5252020K

Unit of Measure: PCS

ABOUT US

PRODUCTS

MISSION

VISION

FOLLOW US

Total Visitors